Welcome to Tikko Products

Specialist products and tools for all granite, Marble, Limestone ,man made and all stone surfaces


Frequently Asked Questions

 

How to Seal a New Stone Floor. Internal Use Only.

Lay the stone but do not grout it. Ensure that the stone is clean. Use stone soap if the stone needs cleaning. Do not use any acidic cement or grout removing products. Make sure the stone is dry. Apply a coat of ultimate stain protecton, follow the instructions on the can.

After 20 hours, grout the floor. Take care to remove all grout residue. When the floor is clean and dry  apply ultimate again, follow the instructions on the can. Maintain with Stone Soap

Deep Clean and Seal an Old or Existing Stone Floor Not Polished.

Clean with DC1 or follow the instructions on the can. You can remove paint and most oils stains with STAIN REMOVER NUMBER 2. follow the instructions on this site and the can. Make sure the stone is dry. Apply a coat of  ULTMATE STAIN PROTECTION, follow the instructions on the can. Maintain with STONE SOAP.

How To Clean And Seal Polished Stone Surfaces.

Never use acidic products on these surfaces.You can use DS 21 which can assist in the removal of cement and grout residue but which does not damage the stone, rinse well with clean water. This product is for heavy soiling, use stone soap for light soiling.  If the floor is not sealed seal with ultimate stain protection. On going cleaning use Stone Soap.

Removing Waxes And Oils From All Types of Stone.

Using STAIN REMOVER NO 1 will usually removes most oil and grease staining.after using stain remover CLEAN WITH A NEATRAL CLEANER SUCH AS N22, You will have to re-seal the areas with ULTIMATE STAIN PROTECTION.

Call us on 0845 652 4111 if you would like further assistance.

 

Copyright © TikkoProducts.com 2008 - Designed By Low Cost Websites
Posh Floors - The Floor Academy